Vastex Lo-E2 DTG/Water Based Conveyor Dryer 30" x 7.3'

The new Lo-E will cure *45 shirts per hour @ 3 minutes in the heat, exceeding the output of our LR-X2D-30 yet will draw about 20% less amps. The Lo-E is the most energy efficient dryer in our line up, and maybe in the world. Lo-E series dryers have a dual zone heat control, with a boost zone to quickly reach cure temperature. This makes it GREAT for inkjet curing! This dryer is best as a dedicated DTG or water based ink dryer, but will still cure plastisol inks if needed.

EXPANDABLE
Add additional heat chambers and conveyor extensions

DEPENDABLE

Industry-leading 15-year heater warranty

EFFICIENT
Draws only 22 amps for highly efficient curing

CONSISTENT
Low friction belt aligner and DC belt speed control with digital display

BENEFITS
Cost/hr. at .05/kwh = $.23/hr. (0.20 Euro/hr.)
Cost/shirt = $.006 (0.0053 Euro)

HEAVY DUTY
“X-Series” Conveyor Belt Roller Tracking System with Teflon coated fiberglass belt and HD belt motor

ACCURATE
Dual digital PID Temperature controller is accurate to +/-1°F

ADJUSTABLE
3” - 7” (7.6 - 17.7 cm) belt-to-heater clearance, adjustable separately on each side for each heater

EXHAUST
High powered exhaust to remove fumes and moisture

Plug Reference

This dryer does not come with a plug. A plug will need to be added to the supplied pigtail, or the machine will need to be wired direct. We recommend speaking with an electrician if you have any questions.