Vastex LittleRed X1D Dual Zone Conveyor Dryer 30" x 4'

Available in two widths, the X1D is the smallest conveyor dryer matched to the output of the most popular DTG printing systems. Its heating chamber has a boost zone to quickly reach cure temperatures for ink jet, water-based and discharge inks.

The LittleRed X1D-30 with a 30 in. (76 cm) wide conveyor belt features a 24 in. (61 cm) wide heater and can dry Digital White Ink at rates up to 29 pieces per hour at 2 minutes dwell time, or up to 65 garments/hr with water-based ink or discharge, and cure up to 150 garments per hour with plastisol ink.

Curing with an X1D Dual Zone Dryer eliminates the flattened, ironed-on appearance and halo associated with heat pressing of printed images, and relegates the heat press to flattening of raised fibers prior to printing with a one second 'touch' per garment.

The X1D comes standard with features found on the company's larger DTG capable dryers including adjustable belt-to-heater clearance to accommodate bulky items, a dual digital PID temperature controller accurate to +/- 1°F, and an X-Series conveyor belt roller tracking system with Teflon coated fiberglass belt. A powered exhaust removes moisture and air contaminants, while cooling the housing and controls.

Plug Reference

This conveyor dryer uses a NEMA 6-20P plug. Please refer to the image below for reference.