Vastex Digit Numbering System Single Color Kit - 8”
Finally, a low cost and easy-to-use numbering system that prints numbers straight without a large gap between! The Vastex DiGiT system uses two screens, each pre-burned with 5 numbers. Easily slide the screen left and right and instantly locate and lock-in the exact position for each number. The Digit system works with most 4, 6, 8 and 10 station presses.
For two color numbers, simply add
two DiGiT systems to your cart.
*Requires a well built press capable of holding a 26 lb attachment, and at least two print heads for one color or four for a 2 color number.
Features
- Converts almost any rear-clamp press* into a numbering press in 20 seconds!
- Prints 2- to 3-times faster than any comparable numbering system!
- Compensates for the thinner #1, always centered and always the same space between numbers. (See features)
- Eliminates the drawbacks of heat transfers and stencils!
- clamps into your screen printing press of any make or model*!
What's Included
- 1 DiGiT-8 (includes 2 attachments)
- 1 set of 9 squeegees
- 2 sets of squeegee rests with tubes
- 1 set 6"/4" combo number screens (pre-burned w/ your font choice)
- 1 set of 8" number screens (pre-burned w/ your font choice)
- 1 roll of screen tape
Register numbers instantly, precisely
Positioned on top of the moving Clamp Rail is a Sight Rail with bright yellow arrow for visual locating of each number. A Detent Rail has half-round cutouts that lock onto the Clamp Rail Bearing for instant and precise registration.
Print 2 to 3 times faster than the competition
* Prints up to 120 one-color numbers per hour with 2 operators ...up to 60 with one operator.
* Prints up to 60 two-color numbers per hour with 2 operators ...up to 40 with one operator.
Font Options
'Varsity' is Most Popular
