Vastex BigRed 4D Dual Zone Conveyor Dryer
BigRed 4D Series dryers are the largest and most powerful dryers engineered specifically for DTG digital inks and/or screen-printed plastisols, water-based inks and discharge, making them ideal for Kornit® and other high-volume DTG shops, as well as automatic screen printing operations requiring high capacities.
All BigRed D Series dryers feature a high-powered pre-heating zone that surges ink temperatures past 300°F (149°C) within the first several inches of conveyor travel, maximizing dwell time at optimum curing temperatures and, in turn, conveyor belt speeds and dryer output.
New in 2022, all BigRed Conveyor Dryers now come standard with adjustable side-mounted heaters that increase the "cure zone" to 24 inches on the 30" model and 48 inches on the 54" model.
The heaters of the BigRed 4D dryers carry a 15-year warranty, and feature closely spaced coils that provide high-density, medium-wavelength infrared heat for maximum cure speed without cold spots or under curing associated with conventional units.
|
FAST
475+ plastisol shirts/hr*
216+ water-based or discharge shirts/hr*
72+ DTG digital @ 2.5 min.
60+ DTG digital @ 3 min.
30+ DTG digital @ 6 min.
ACCURATE
Temperature controller is accurate to +/-1 degree F.
Digital PID with Fuzzy logic is the most advanced in the industry
ADJUSTABLE
Hand crank raises or lowers all heating chambers simultaneously to within 2" - 7" (5 - 17.7 cm) of the belt for bulky items or hats
SMART
Unique cooling tray at the exit cools garments quickly as they leave the heating chamber
CONVENIENT
Digital belt speed voltmeter, a must have!
|
VERSATILE
Make-up Air and Negative Exhaust Air, removes moisture and fumes fast
FILTERED
Filtered air intake provides clean curing air, no recycled fumes!
HEAVY DUTY
"X-Series" Conveyor Belt Tracking System
BELT WIDTH
(max garment width)
30" (76 cm)
HEATER WIDTH
24" (61 cm)
EXPANDABLE
Add heat chambers and belt extensions
|
Plug Reference
This dryer does not come with a plug. A plug will need to be added to the supplied pigtail, or the machine will need to be wired direct. We recommend speaking with an electrician if you have any questions.