Vastex AutoFlash Rotator Upgrade - 240v

Add the AutoFlash to your existing Vastex flash dryer to add auto rotation capabilities and get the most consistent prints possible.

The AutoFlash upgrade rotates the head of the flash cure unit into place above the pallet with the touch of a foot pedal, and automatically rotates the head away from the pallet after a user-adjustable dwell time has elapsed to prevent burning or under-flashing of garments that occurs when operators become distracted.

Our AutoFlash units come estandard with an HMI (Human-Machine-Interface) to control and display dwell time and direction of head rotation. More visible from a distance than previous controls, it also displays a 'ready' message for the next cycle and improves cycle reaction by responding accurately whether the foot switch is pressed during or following a flash cure cycle.

The Auto Flash unit features a high-torque DC gear motor and eccentric arm drive that actuates head rotation progressively for smooth starts and stops, and a foot pedal switch with 7 ft (2 m) cord for operator convenience.

A "Breakaway Detent" feature stops the head from rotating if it encounters an obstacle, maximizing operator safety while minimizing damage to the flash cure head, the Auto-Flash gearbox and/or the screen printing press.

Vastex is currently unable to produce the touchscreen controls, so these units will instead ship with digital timers until they are able to get the touchscreen controls back in production.

Plug Reference

This auto flash rotator uses a NEMA 6-15P plug. Please refer to the image below for reference.