Vastex LittleRed X1 Conveyor Dryer 30" x 4'

The all-new series of Little Red Conveyor Dryers from Vastex offers expandability, repeatable results and fast payback never before available to mid-capacity textile printers.

The Little Red X1-30 model with 30 in. (76 cm) wide x 48 in. (122 cm) long conveyor belt is offered with a 24 in. (61 cm) wide 120V/2,000 watt heater to cure up to 90 plastisol-printed images or 45 discharge or water-based printed images per hour, or a 24 in. (61 cm) wide 240V/2,600 watt heater to cure up to 130 plastisol-printed images or 45 discharge or water-based printed images per hour.

Optional powered exhaust system cools the outer cabinet while evacuating moisture and fumes.

EFFICIENT
Closely spaced coils provide high-density, medium-wavelength infrared heat for maximum cure speed without cold spots or under-curing

DEPENDABLE
Industry-leading 15-year heater warranty

ACCURATE
Digital PID Temperature controller is accurate to +/-1°F

CONSISTENT
Low friction belt aligner and DC belt speed control with digital display

HEAVY DUTY
"X-Series" Conveyor Belt Tracking System with Teflon coated fiberglass belt

ADJUSTABLE
2 - 7 in. (5 - 18 cm) belt-to-heater clearance, adjustable separately on each side for each heater

EXPANDABLE
Add 18 in. (46 cm) and 36 in. (92 cm) chambers and/or 18 in. (46 cm) belt extensions

Plug Reference

This conveyor dryer uses a NEMA 5-20P plug. Please refer to the image below for reference.