"The Pink Stuff" Dehazer & Degreaser 4 Quart Case

"The Pink Stuff" is a vicious dehazer, abrader and degreaser combo designed to work on a variety of inks. It cleans mesh stains without the awful odor, and works more efficiently than most hazardous stain removers. "The Pink Stuff" leaves your screen mesh free of all oils and contaminants, which will reduce the occurrence of pinholes and make for better screens. It also has a very pleasant smell opposed to your typical liquid dehazer.

Instructions For Use

• Remove all ink residue and emulsion from screen before using "The Pink Stuff".
• Wet screen on both sides and brush product into the screen mesh, starting with the ink side.
• Agitate on both sides of screen with a brush and set aside for approximately four minutes.
• Use high pressure to wash off the print side of screen, starting at the bottom of screen.
• Use low pressure water to flood rinse both sides of screen, ending on ink side of screen.
• Allow screen to thoroughly air dry before coating with photo emulsion.