CCI LSR-20 Industrial Haze Remover - Quart

This product is a semi-viscous liquid ghost/image stain remover that is designed for use with a variety of inks. LSR/20 cleans mesh of stains with less noticeable odor and works better than most liquid stain removers. LSR/20 contains a proprietary mesh protector. *Before using, remove all ink residue and emulsion from the screen.

Wet Application

Brush LSR/20 on both sides of screen, allow to dwell 1-3 minutes, then high pressure rinse starting from the bottom of the screen to the top on the print side of the screen. Repeat high pressure rinse on the reverse side. Apply a degreaser and remove by a low pressure flood rinse to both sides of the screen. If residual stain is present, use dry application method.

Dry Application

Brush LSR/20 on a completely dry screen and allow product to dry. Reactivate LSR/20 by applying a CCI screen wash. Agitate by brushing in a screen wash on both sides of screen until dried product is dissolved. High pressure rinse both side of screen, starting from the bottom to the top. Apply a CCI degreaser and remove by low pressure flood rinsing both sides of screen.