BBC 18"x18" Forced Air Flash Dryer
With the increasing popularity of water based and discharge inks, flashing and curing has become an issue for many screen printers world wide. Without proper hot airflow, flashing and curing water based and discharge prints can take two to three times longer than prints using plastisol ink. To insure a quick and proper cure with water based or discharge inks, forced hot air is required. This Air Flash dryer by BBC Industries is the first affordable forced air flash dryer to hit the market. This is a combined infrared and pass-through air heater, perfect for curing water based, discharge and plastisol inks.
Flash Dryer Details
- Works with water based, discharge and plastisol inks
- Keeps t-shirts slightly cooler while hitting ink with more heat
- Solid state temperature controls
- Variable heat controller permits infinite temperature settings from 0-100%
- Volts: 240
- Amps: 16.7
- Plug: NEMA 6-20P
Plug Reference
This flash dryer uses a NEMA 6-20P plug. Please refer to the image below for reference.
